• + Expand All
  • - Close All
  • Drilling Fluid System (On board)



    Drilling Fluid System (On board)








    Pressure, max
    750 psi
    52 bar



    Flow, max
    16 gpm
    60.57 l/min

  • POWER
    JT10
    POWER

    Powered by a Tier 4, 66-hp (49 kW) Deutz® diesel engine, the JT10 is the most powerful drill in its class. A Tier 4i option is available for less regulated countries.

    For maximum strength and durability, the JT10 provides 1,100 ft·lb (2066.7 Nm) of rotational torque.

    The engine is air-cooled and quiet for simplified maintenance and longer operation.

    The JT10 comes standard with a 16-gpm mud pump or an optional 20-gpm mud pump, for better mud flow and performance, allowing operators to jet and complete larger-diameter reams on smaller jobsites.

  • PRODUCTIVITY
    JT10
    PRODUCTIVITY

    An onboard fluid tank holds 40 gal of fresh water, providing additional fluid for short bores and easy cleanup. It also allows operators to effectively drill in tight spaces where an additional fluid mixer wouldn’t fit.

    The JT10 holds 324 ft (98.8 m) of drill pipe onboard to improve productivity and allow operators to finish virtually any utility installation job.

    The JT10 has the quickest cycle times in its drill class. The machine’s slow zone is shortened increasing cycle times and allowing operators to put more pipe in the ground faster.

  • Battery (Tier 4i)



    Battery (Tier 4i)








    SAE reserve capacity rating
    165 min




    SAE cold crank rating @ 0°F (-18°C)
    875 amps




    Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.



  • UPTIME
    JT10
    UPTIME

    A field-proven rack-and-pinion thrust drive with a welded-on double rack reduces operator maintenance, increases reliability and improves sturdiness.

    The machine’s open-top vise wrenches are angled toward the operator for an excellent view of the tool joint and require no daily maintenance.

    With no grease zerks and easy access to all service points, maintenance is simplified on the JT10, helping to keep the machine out of the shop and on the job.

    The drill pipe lubrication system is a standard feature allowing operators to drill for longer periods of time and improve uptime.

  • OPERATOR'S STATION
    JT10
    OPERATOR'S STATION

    A newly designed operator's station is equipped with an ergonomic traversing seat, positioning the operator near the center of the pipe rack for easy-to-reach pipe handling.

    The new ergonomic seat is designed to reduce operator strain and keep the operator comfortable for long hours on a job.

    An advanced operator display provides a clear view into all engine diagnostics for boosted performance and productivity.

    The JT10 is equipped with a single joystick for quicker and smoother operation, freeing a hand for operators to focus on other tasks, including controlling mud flow and jobsite communication.

  • Battery (Tier 4)



    Battery (Tier 4)








    SAE reserve capacity rating
    195 min




    SAE cold crank rating @ 0°F (-18°C)
    950 amps


  • Power (Tier 4i)



    Power (Tier 4i)








    Engine
    Deutz D2011L04i




    Fuel
    Diesel




    Cooling medium
    Integrated oil




    Injection
    Direct




    Aspiration
    Natural




    Number of cylinders
    4




    Displacement
    189 in3
    3.1 L



    Bore
    3.7 in
    94 mm



    Stroke
    4.4 in
    112 mm



    Manufacturer's gross power rating
    53.5 hp
    39.9 kW



    Rated speed
    2,300 rpm




    Emissions compliance
    EPA Tier 4i
    EU Stage IIIA

  • Power Pipe



    Power Pipe








    Length of drill pipe, nominal
    72 in
    1.8 m



    Diameter of drill pipe, tool joint end
    2 in
    51 mm



    Diameter of drill pipe
    1.6 in
    40 mm



    Bend radius, min
    82 ft
    25 m



    Weight of drill pipe, lined
    29 lb
    13 kg

  • SUPERIOR SUPPORT
    JT10
    SUPERIOR SUPPORT

    As with all Ditch Witch equipment, the JT10 is backed by a worldwide network of dealerships you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service and expert advice, your Ditch Witch dealership is your trusted partner.

  • Power (Tier 4)



    Power (Tier 4)








    Engine
    Deutz TD2.9




    Fuel
    Diesel




    Cooling medium
    Liquid




    Injection
    Direct




    Aspiration
    Turbocharged




    Number of cylinders
    4




    Displacement
    199 in3
    3.3 L



    Bore
    3.7 in
    95 mm



    Stroke
    4.5 in
    115 mm



    Manufacturer's gross power rating
    66 hp
    49 KW



    Rated speed
    2,200 rpm




    Emissions compliance
    EPA Tier 4
    EU Stage IIIB







  • Operation



    Operation

    U.S
    Metric





    Spindle speed, max
    186 rpm




    Spindle torque, max
    1,100 ft·lb
    1491 N·m



    Thrust force
    9,000 lb
    40 kN



    Pullback force
    10,000 lb
    44.48 kN



    Bore diameter, min
    3 in
    76 mm



    Backream diameter
    Variable




    Ground travel speed





    Forward
    2.3 mph
    3.7 km/hr



    Reverse
    1.5 mph
    2.4 km/hr

  • Fluid Capacities



    Fluid Capacities








    Hydraulic reservoir
    18 gal
    68 L



    Fuel tank
    18 gal
    68 L

  • INNOVATIVE DESIGN
    JT10
    INNOVATIVE DESIGN

    The JT10 is equipped with a heavy-duty anchor system and integrated remote tracking display—features usually only seen on larger drill units.

    The JT10 is the shortest drill in its class, giving it the ability to effortlessly maneuver in tight jobsites.

    Small, compact machine is easy to transport from jobsite to jobsite with a rear ignition for faster jobsite setup.

  • Dimensions



    Dimensions








    Height
    74 in
    1.9 m



    Length
    146 in
    3.7 m



    Width
    48 in
    1.2 m



    Entry angle
    10-14°




    Angle of approach
    18°




    Angle of departure
    18°




    Drilling unit operating mass (water tank empty, 50 drill pipes, T4)
    7,120 lb
    3,230 kg



    Drilling unit operating mass (water tank full, 50 drill pipes, T4)
    7,380 lb
    3,350 kg



    Drilling unit operating mass (water tank empty, 50 drill pipes, T4i)
    6,750 lb
    3,060 kg



    Drilling unit operating mass (water tank full, 50 drill pipes, T4i)
    7,100 lb
    3,220 kg